Click here to Sign Up.








Fome-Cor® Self-Adhesive is comprised of extruded polystyrene foam with clay-coated paper facers, one of which is covered with pressure sensitive adhesive.  Simply peel back the release facer as you position the graphic on the sticky surface. Made In USA.

  • Eliminates the use of pressure- sensitive adhesive stock
  • Available in repositionable Low-Tack (LT) or immediate bonding High-Tack (HT)
  • HT identified by red release liner and LT identified by blue release liner

Flammability Characteristics

  • Combustible

Recommended Applications

  • P-O-P Displays Short-term application life
  • Exhibits & Kiosks Short-term application life
  • Framing Long-term application life
  • Signage - Interior Short-term application life

Recommended Fabrications

  • Mounting
  • Knife Cutting
  • Die Cut/Punch
  • Embossing
Gauges and Colors Stock Sheet Sizes
3/16" High-Tack (HT): Bright White clay-coated facers-White foam 24"x36"; 32"x40"; 48"x72"; 48"x96"
3/16" Low-Tack (LT): Bright White clay-coated facers-White foam 24"x36"; 32"x40"; 40"x60"; 48"x96"
3/16" High-Tack (HT): Black facers-Black foam 24"x36"; 32"x40"
3/16" Low-Tack (LT): Black facers-Black foam 24"x36"; 32"x40"
Product Sheet - Fome-Cor®

Product Sheet - Fome-Cor®

PDF 02/13/2018 
Fabrication Manual - Fome-Cor®

Fabrication Manual - Fome-Cor®

PDF 12/05/2017 
FOME-COR®

FOME-COR®

JPG 
Fome-Cor® SDS

Fome-Cor® SDS

PDF 03/16/2018 
3A Composites USA Inc.
Two Harbour Place
721 Jetton Street, Suite 325
Davidson, NC, 28036
800-626-3365

     

©3A Composites USA, 2014 - All Rights Reserved. ®Registered Trademark of 3A Composites USA. ™Trademark of 3A Composites USA.