Sign-Maker Creates Big Looks For Small-Business Mall Storefronts With Gatorfoam

GSWorx, 3A Composites USA, Gatorfoam, KidsStopYouShop
Shopping-mall signage often is associated with national retail stores that pour thousands of dollars into supporting a corporate-designed brand image. While much of that storefront signage is designed for installation inside enclosed mall spaces, these signs often are fabricated with the kinds of sturdy materials that are designed to weather outdoor conditions.

GSWorx, 3A Composites USA, Gatorfoam, YogopolisFor small, independent businesses – many of which lease seasonal mall space to target holiday shoppers – this type of signage is out of reach. At the same time, mall managers expect these stores to present a professional image.

Greg Scott, owner of GSWorx in New Philadelphia, Ohio, meets the needs of both independent business owners and mall management by creating cost-effective three-dimensional storefront signage with lightweight-yet-durable materials, including Gatorfoam® graphic display board.

GSWorx, 3A Composites USA, Gatorfoam, PrettyGirl“For these small businesses, typical channel-letter metal signs are overkill,” said Scott. “Ninety-five percent of those signs are made to be installed outside and can start at $5,000 and up. I can create a professional brand image for these businesses with a three-dimensional sign that costs less than half that amount.”

When Scott started his business a decade ago, one of his first customers was New Towne Mall in New Philadelphia, which is owned and operated by the WP Glimcher retail real-estate investment company. At that time, mall management had no requirements for signage, according to Scott, who said that some seasonal tenants had started installing banners across storefronts. In response, mall management issued requirements that all storefront signage must be at least 2 inches thick and include three-dimensional lettering.

GSWorx, 3A Composites USA, Gatorfoam, Smart FixAt that time, most three-dimensional signs in the mall were created with layered plywood, plastic or metal channel letters. Scott thought that Gatorfoam would serve as a more cost-effective solution for creating these types of dimensional signs.

“I tested Gatorfoam and it worked really well,” said Scott. “I can create a heavy-looking, thick sign that’s easy to handle during installation. I can grab a 4-by-8 sheet of Gatorfoam by the end and hold it horizontally by myself. I was impressed with Gatorfoam’s rigidity considering the material is lightweight.”

Mall management was so impressed with Scott’s initial signage created with Gatorfoam for New Towne Mall’s Seattle Cafe that photos of this graphic display were sent to other malls owned by WP Glimcher.

GSWorx, 3A Composites USA, Gatorfoam, Sophies Cafe
“Everyone seemed to like it because it didn’t look like any other mall signs; I started getting calls from mall managers in other states,” said Scott, who studied visual communications at The Art Institute of Pittsburgh and often develops illustrated iconic characters to help brand these small businesses.

“I’ve been contacted by small business owners who tell me that they have no logo and no money but they need a sign in a week,” said Scott. “Although I can’t accommodate all of the tire-kickers, by using Gatorfoam, I can fabricate a sign fairly inexpensively but create an expensive look. You get a lot for your money.”

GSWorx, 3A Composites USA, Gatorfoam SurferMonkeyScott has created a niche market focused on storefront mall signage for independent businesses with clients located in the Columbus, Ohio, area as well as in Kentucky and Pennsylvania.

“I’ve marketed my services to these malls with recommended signage requirements,” according to Scott, who said that mall management must approve layouts for all signage. “When they get a new non-franchise tenant, I’m the first contact. The mall doesn’t have to tell tenants what they need.”

Scott regularly turns to Gatorfoam to create three-dimensional storefront signs – either by fabricating several layers of Gatorfoam or by combining Gatorfoam lettering with other materials such as acrylic, metal and high-density urethane (HDU).

GSWorx, 3A Composites USA, Gatorfoam, DamagedScott selects white Gatorfoam graphic display board for storefront signage often in the 1-inch thickness and said that he always paints exposed edges “to create a nice, finished look.” He most often turns to water-based paints but has used everything from craft paints to house paints and finishes with a clear acrylic coat. Scott cuts Gatorfoam – which is supplied by the Cleveland branch of distributor N. Glantz & Son– with standard woodworking tools.

“Gatorfoam tools really well and takes paint really well,” said Scott. “An entire sign will weigh 10 pounds, if that much. … These signs are always installed high up on the storefront. A lot of times, I’ve had to install an 8-foot sign by myself; and, I’ve been able to hold an entire 8-foot sign in one hand. I love that Gatorfoam is so lightweight.”

Photography courtesy of © GSWorx